Bed Shielding Canopy Floor Sheet

(Necessary if you have exposure to microwave
radiation coming from below your bedroom)

If your sleeping area is located on the ground level, with no sources of radiation coming up from below, then you do not need to use a shielding canopy floor sheet. However, if your sleeping area is located upstairs, or in an apartment above the ground floor, then you may have exposure factors coming up from below and will need to have a shielding floor sheet for your RF bed canopy.

We suggest shielding sleeping areas from below if not directly on the ground or a concrete slab. This can be done with the use of this shielding floor sheet made from Swiss Shield Naturell fabric. The sheet is to be laid under the bed or carpet and is finished with a hem on all sides. To achieve optimal results, it is important to install this item as well as the canopy in a low AC electric field environment. You may need to use and Electric Field meter or the assistance of an EMF measuring technician to ensure the sleeping area has low AC Electric Field exposure. Turning off the circuits in the bedroom at night can help reduce AC electric fields in sleeping areas

Sizes

- Single: 1.5m x 2.5m (59 inches x 98 inches)

- Double and Queen: 2m x 2.5m (79 inches x 98 inches)

- King: 2.5m x 2.5m (98 inches x 98 inches)

Technical Data

Size:	Single: 1.5m x 2.5m (59 inches x 98 inches) Double and Queen: 2m x 2.5m (79 inches x 98 inches) King: 2.5m x 2.5m (98 inches x 98 inches)
Color:	Sheer, Slightly Off White
Characteristics:	Washable, colourfast, antistatic
Care:	Hand wash in cold water, hang to dry
Raw Materials:	82% cotton, 18% copper/silver
Certificates:	MIL-STD 285, NSA 65-6, Öko-Tex Standard 100+1000
Shielding Characteristics:	99.99% or 40 dB at 1000 MHz

Note:

• All Swiss Shield fabrics reflect high frequency electromagnetic waves and are not externally conductive, therefore no need for grounding
• All Swiss Shield fabrics are made with an insulated metallic thread which allows the fabric to be washed without loss of shielding
• A non-conductive fabric ensures there is no exposed metal which can rub off or become airborne and cause irritation or health effects
• It is always recommended to measure RF exposure before and after an installation, if unsure, consult a qualified EMR technician or acquire the proper measuring equipment
• Reduce Low frequency AC electric fields (ELF) in area of installation