Gigahertz Solutions ME3030B
Electric and Magnetic Field Meter

PLEASE NOTE! Be sure you are choosing the correct meter for your needs and have done your research. Absolutely no returns will be accepted once you open the package and use the meter! If you receive the package, DO NOT OPEN IT, but change your mind, we will honor a return. Many times, people do not know how to use these meters, then think they are 'defective' because of their own lack of education. This is time consuming and costs us money. Or some people just want to use the meter then return it, which happens on Amazon quite often! Absolutely no returns accepted if you open the box after receiving the meter. Be sure you are choosing the meter you want!

Measures AC Electric Fields and AC Magnetic Fields
16 Hertz to 2000 Hertz

This meter ships from Canada by Fed Ex - Arrival time 5 to 7 business days.

Excellent quality entry level EMF Meter. Highly accurate meter for measuring electric fields and magnetic fields. (This is not a "radio frequency / microwave" meter, it will not measure the radiation of cell phones or towers, or cordless phones.) This meter is for the measurement of low level electric and magnetic fields from appliances, wiring in the walls, overhead power poles, anything that has electricity flowing through it.

This meter is well made, accurate and easy to use. We also send reference or 'cheat' notes to tape onto your meter for a quick reference to exposure guidelines, making everything very simple! On this meter you just move the selection switch to "E" for electric fields, measured in volts per meter, or to "M" for magnetic fields, measuring in nanotesla. Again, we provide reference notes that take all confusion and guesswork away!

The Gigahertz Solutions ME3030B is an exceptional entry level EMF meter.

• Easy to Operate, simply power on the unit, select mode of operation, “E” for Electric field or ”M” for Magnetic field and then scan area of concern
• LCD digital display will indicate the sum total field strength of all sources within its frequency range
• Audible tone similar to that of a Geiger counter indicates level of exposure
• Convenient conversion table on back of meter converting nT to mG
• Excellent Sensitivity - able to accurately identify Electric fields down to 1 V/m and Magnetic fields to 1 nT or 0.01mG
• Readings are 98% accurate within the 16 Hertz to 2000 Hertz frequency range. Sources in this range include all standard household appliances, electronic devices, electrical wiring and wiring errors, high voltage power lines, power transformers
• Powered by a 9V alkaline battery (included)
• All Gigahertz Solutions Meters are backed by a 2 year manufacturer's warranty

Features:

• Auto Power Off: Saves on battery use – will auto-power off after 40 min of continuous EMF testing
• Audible Tone: Audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
• LCD Display: Easy to read 3.5 digit display
• Power Supply: 9 Volt alkaline battery included
• Battery Low Indicator: Meter will auto-power off 3 minutes following battery low signal display
• Operating Time: Alkaline disposable provides 24 - 36 hrs of continuous EMF testing
• AC Electric Field: Value displayed in Volts per meter V/m
• AC Magnetic Fields: Value displayed in nanoTesla nT. Note:100nT = 1 mG (conversion table on back of meter for convenience)
• Single Axis Measurement: Beneficial for source detection

Includes:

• ME3030B EMF Meter
• Users' Guide
• 2 Year Warranty Certificate
• Grounding Cable – 17 foot - for AC electric field measurements
• 9V Alkaline Battery

Optional Carrying Case:

• Interior Dimensions: L=18cmx W=8cm x H=3cm
• Exterior Dimensions: L=20cmx W=10cm x H=4cm

Calibration:

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every ME3030B meter made by Gigahertz Solutions has been individually calibrated to a traceable standard.

Specifications: